Push-in PCB unthreaded spacers are a type of spacer that is used to provide a space between two components on a printed circuit board (PCB). They are typically made of plastic or metal and have a cylindrical shape. The spacer is inserted into a hole in the PCB and then pushed in until it is flush with the surface of the board.
Unit of Measure
Item Description |
N/A Spacer - Round Female Curved for Tubes, Off-White, 1 OD, 0.325 ID, 1/4 Length, Nylon |
Product Major Category |
N/A Spacers & Standoffs |
Measurement |
N/A Unified |
Material |
N/A Nylon |
Length |
N/A 1/4 |
Inside Diameter |
N/A 0.325 |
Outside Diameter |
N/A 1 |
Specifications |
N/A UL 94V2 |
MV |
N/A 03-0.328 |
Product Guide |
N/A Push-In PCB Unthreaded Spacer Guide |
About OneMonroe |
N/A VMI - Custom Manufacturing, Technical Guides - Quality - Company Overview |
Item Notes |
N/A Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
