Self-clinching nuts are a type of fastener that is installed by crimping the end of the nut into a hole. This creates a secure connection and prevents the nut from loosening. Self-clinching nuts are typically made of steel or stainless steel and are available in a variety of sizes and finishes.
Unit of Measure
Item Description |
N/A Captive S-M3.5-2ZI Nut Steel Zinc Metric M3.5x0.6 x 2 |
Product Major Category |
N/A Fasteners (Self Clinching) |
Datasheet |
N/A Captive 17 21 Self Clinching Steel Stainless Steel Nuts Series C CS S SS CLS CLSS |
Measurement |
N/A Metric |
Search Measurement |
N/A Metric |
Thread Size |
N/A M 3.5 x 0.60 |
B |
N/A 7.1 ±0.25 |
Material |
N/A Steel |
Search Material |
N/A Steel |
Search Material - Sub |
N/A Steel, Heat Treated |
Search Brand |
N/A Captive |
Finish |
N/A Zinc |
Length |
N/A TBD |
Product Category ID |
N/A PRODUCTS-FASTENERS-CLINCHFASTENER-NUTS |
A |
N/A 4.73 -0.13 |
D |
N/A 1.37 |
Weight per Thousand |
N/A 1.01 |
Product Minor Category |
N/A Nuts - Clinch |
Sheet Min |
N/A 1.4 |
Hole Diameter |
N/A 4.75 +.08 |
C |
N/A 1.5 ±.25 |
CL to Edge |
N/A 5.6 |
CRS Installation Force |
N/A 13.4-26.7 kN |
CRS Push Out |
N/A 1200 N |
CRS Torque Out |
N/A 2.3 N-m |
5052 H34 Aluminum Installation Force |
N/A 11.2-13.4 kN |
5052 H34 Aluminum Push Out |
N/A 965 N |
5052 H34 Aluminum Pull Out |
N/A 2.5 |
CR Similar to Brand Pem |
N/A S-M3.5-2ZI |
Product Selector |
N/A Nut / Clinch |
Product Guide |
N/A Self-Clinching Nuts Guide |
About OneMonroe |
N/A VMI - Custom Manufacturing, Technical Guides - Quality - Company Overview |
Item Notes |
N/A Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
