Self-clinching panel fasteners are a type of fastener that is installed by crimping the end of the fastener into a hole in sheet metal. This creates a secure connection without the need for drilling or tapping. Self-clinching panel fasteners are typically made of steel or stainless steel and are available in a variety of sizes and finishes.
Unit of Measure
Item Description |
N/A Captive PFC2-M4-50 Panel Fastener, 300 Series Stainless Steel, Passivated, Metric, M4x0.7 x 7.9 |
Product Major Category |
N/A Fasteners (Self Clinching) |
Measurement |
N/A Metric |
Search Measurement |
N/A Metric |
Thread Size |
N/A M 4 x 0.70 |
B |
N/A 9.3 |
Material |
N/A Stainless |
Search Material |
N/A Stainless |
Search Material - Sub |
N/A Stainless Steel, 300 Series |
Finish |
N/A Passivated |
Length |
N/A 6.4 mm |
Product Category ID |
N/A PRODUCTS-FASTENERS-CLINCHFASTENER-PANELSCREWCOMPONENTS |
A |
N/A 11.4 -0.13 |
D |
N/A 9.5 |
Product Minor Category |
N/A Captive Panel Screws and Components |
Sheet Min |
N/A 1.5 |
Hole Diameter |
N/A 7.95 +.08 |
C |
N/A 7.9 |
G |
N/A 7.9 |
P |
N/A 0 |
Y |
N/A 2.08 |
CL to Edge |
N/A 7.9 |
CRS Installation Force |
N/A 16.9 kN |
CRS Push Out |
N/A 1780 N |
5052 H34 Aluminum Installation Force |
N/A 12.9 kN |
5052 H34 Aluminum Push Out |
N/A 1330 N |
Units and Tolerances |
N/A Specific units and tolerances are not displayed, but may be applicable for this product. For more information please call us or contact customer service. |
CR Similar to Brand Pem |
N/A PFC2-M4-50 |
Product Selector |
N/A Panel Fasteners / Captive Panel Screws & Components |
Product Guide |
N/A Self-Clinching Panel Fasteners Guide |
About OneMonroe |
N/A VMI - Custom Manufacturing, Technical Guides - Quality - Company Overview |
Item Notes |
N/A Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
