Self-clinching studs, flush head are a type of stud that is designed to provide a flush finish when installed. The stud has a small, flat head that is crimped into a hole that is the same diameter as the head of the stud. This makes it possible to install the stud without creating a protrusion on the surface of the material. Self-clinching studs, flush head are typically made of steel or stainless steel and are available in a variety of sizes and finishes.
Unit of Measure
Item Description |
N/A Captive FHA-M8-30 Stud, Flush Head, 2024-T4 Aluminum, M8x1.25 X 30 |
Product Major Category |
N/A Fasteners (Self Clinching) |
Measurement |
N/A Metric |
Search Measurement |
N/A Metric |
Thread Size |
N/A M 8 x 1.25 |
Material |
N/A Aluminum |
Search Material |
N/A Aluminum |
Search Material - Sub |
N/A Aluminum, 2024-T4 |
Finish |
N/A No Finish |
Length |
N/A 30 mm |
Product Category ID |
N/A PRODUCTS-FASTENERS-CLINCHFASTENER-STUDSANDPINS |
Product Minor Category |
N/A Studs - Clinch & Pins |
Sheet Min |
N/A 2.4 |
Hole Diameter |
N/A 8.0 +0.08 |
CL to Edge |
N/A 9.6 |
Max Nut Tightening Torque |
N/A 8.4 |
Units and Tolerances |
N/A Specific units and tolerances are not displayed, but may be applicable for this product. For more information please call us or contact customer service. |
CR Similar to Brand Pem |
N/A FHA-M8-30 |
Product Selector |
N/A Stud / Clinch |
Product Guide |
N/A Self-Clinching Studs, Flush Head Guide |
About OneMonroe |
N/A VMI - Custom Manufacturing, Technical Guides - Quality - Company Overview |
Item Notes |
N/A Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
