Self-clinching studs, flush head are a type of stud that is designed to provide a flush finish when installed. The stud has a small, flat head that is crimped into a hole that is the same diameter as the head of the stud. This makes it possible to install the stud without creating a protrusion on the surface of the material. Self-clinching studs, flush head are typically made of steel or stainless steel and are available in a variety of sizes and finishes.
Unit of Measure

Item Description

N/A Captive FH-M6-28ZI Stud, Flush Head, Steel, Finish:Zinc, M6x1.0 X 28

Product Major Category

N/A Fasteners (Self Clinching)

Measurement

N/A Metric

Search Measurement

N/A Metric

Thread Size

N/A M 6 x 1.00

Material

N/A Steel

Search Material

N/A Steel

Search Material - Sub

N/A Steel, Heat Treated

Finish

N/A Zinc

Length

N/A 28 mm

Product Category ID

N/A PRODUCTS-FASTENERS-CLINCHFASTENER-STUDSANDPINS

Product Minor Category

N/A Studs - Clinch & Pins

Sheet Min

N/A 1.6

Hole Diameter

N/A 6.0 +0.08

CL to Edge

N/A 7.9

Max Nut Tightening Torque

N/A 5.7

2200mm CRS Installation Force

N/A 44.5 kN

2200 CRS Push Out

N/A 2560 N

2200 CRS Torque Out

N/A 11.3 N-m

2400mm Aluminum Intallation Force

N/A 28.9 kN

2400mm Aluminum Push Out

N/A 1660 N

2400mm Aluminum Torque Out

N/A 7.3 N-m

Units and Tolerances

N/A Specific units and tolerances are not displayed, but may be applicable for this product. For more information please call us or contact customer service.

CR Similar to Brand Pem

N/A FH-M6-28ZI

Product Selector

N/A Stud / Clinch

Product Guide

N/A Self-Clinching Studs, Flush Head Guide

About OneMonroe

N/A VMI - Custom Manufacturing, Technical Guides - Quality - Company Overview

Item Notes

N/A Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.