Self-clinching flush nuts are a type of nut that is installed by crimping the end of the nut into a hole. This creates a secure connection and prevents the nut from protruding from the surface of the material. Self-clinching flush nuts are typically made of steel or stainless steel and are available in a variety of sizes and finishes.
Unit of Measure
Item Description |
N/A Captive F-M2.5-1 Nut, Flush, 300 Series Stainless Steel, Passivated, Metric, M2.5x0.5 x 1 |
Product Major Category |
N/A Fasteners (Self Clinching) |
Measurement |
N/A Metric |
Search Measurement |
N/A Metric |
Thread Size |
N/A M 2.5 x 0.45 |
B |
N/A 1.5 -0.13 |
Material |
N/A Stainless |
Search Material |
N/A Stainless |
Search Material - Sub |
N/A Stainless Steel, 300 Series |
Finish |
N/A Passivated |
Length |
N/A TBD |
Product Category ID |
N/A PRODUCTS-FASTENERS-CLINCHFASTENER-NUTS |
D |
N/A 4.34 |
Weight per Thousand |
N/A 0.26 |
Product Minor Category |
N/A Nuts - Clinch |
Sheet Min |
N/A 1.5 |
Hole Diameter |
N/A 4.37 +.08 |
H |
N/A 4.8 |
CL to Edge |
N/A 6 |
Max Screw Torque |
N/A 0.23 N-m |
CRS Installation Force |
N/A 13.3 kN |
CRS Push Out |
N/A 0.9 N-m |
5052 H34 Aluminum Installation Force |
N/A 8.9 kN |
5052 H34 Aluminum Push Out |
N/A 0.9 N |
Units and Tolerances |
N/A Specific units and tolerances are not displayed, but may be applicable for this product. For more information please call us or contact customer service. |
CR Similar to Brand Pem |
N/A F-M2.5-1 |
Product Selector |
N/A Nut / Floating & Flush |
Product Guide |
N/A Self-Clinching Flush Nuts Guide |
About OneMonroe |
N/A VMI - Custom Manufacturing, Technical Guides - Quality - Company Overview |
Item Notes |
N/A Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
