Self-clinching nuts for stainless steel are a type of nut that is installed by crimping the end of the nut into a hole. This creates a secure connection and prevents the nut from loosening. Self-clinching nuts for stainless steel are typically made of 304 or 316 stainless steel and are available in a variety of sizes and finishes.
Unit of Measure
Item Description |
N/A Captive SP-M4-1 Nut, For SS, 17-4 Stainless Steel, Passivated, Metric, M4x0.7 x 1 |
Product Major Category |
N/A Fasteners (Self Clinching) |
Measurement |
N/A Metric |
Search Measurement |
N/A Metric |
Thread Size |
N/A M 4 x 0.70 |
B |
N/A 5.38 |
Material |
N/A Stainless |
Search Material |
N/A Stainless |
Search Material - Sub |
N/A Stainless, Precipitation Hardened |
Finish |
N/A Passivated |
Length |
N/A TBD |
Product Category ID |
N/A PRODUCTS-FASTENERS-CLINCHFASTENER-NUTS |
A |
N/A 0.97 -0.13 |
Weight per Thousand |
N/A 1.5 |
Product Minor Category |
N/A Nuts - Clinch |
Sheet Min |
N/A 1 |
Hole Diameter |
N/A 5.41 +0.08 |
C |
N/A 2 ±.25 |
CL to Edge |
N/A 6.9 |
304SS Installation Force |
N/A 22-31 kN |
304SS Push Out |
N/A 790 N |
304SS Torque Out |
N/A 4.15 N-m |
Units and Tolerances |
N/A Specific units and tolerances are not displayed, but may be applicable for this product. For more information please call us or contact customer service. |
CR Similar to Brand Pem |
N/A SP-M4-1 |
Product Selector |
N/A Nut / Hardened Stainless (SP type) |
CR 125 |
N/A HA30L-0001-0141#0105 |
Product Guide |
N/A Self-Clinching Nuts for Stainless Steel Guide |
About OneMonroe |
N/A VMI - Custom Manufacturing, Technical Guides - Quality - Company Overview |
Item Notes |
N/A Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
