Self-clinching studs, flush head are a type of stud that is designed to provide a flush finish when installed. The stud has a small, flat head that is crimped into a hole that is the same diameter as the head of the stud. This makes it possible to install the stud without creating a protrusion on the surface of the material. Self-clinching studs, flush head are typically made of steel or stainless steel and are available in a variety of sizes and finishes.
Unit of Measure

Item Description

Captive FH-M6-25ZI Stud, Flush Head, Steel, Finish:Zinc, M6x1.0 X 25 93580A616

Product Major Category

Fasteners (Self Clinching)

Measurement

Metric

Search Measurement

Metric

Thread Size

M 6 x 1.00

Material

Steel

Search Material

Steel

Search Material - Sub

Steel, Heat Treated

Finish

Zinc

Length

25 mm

Product Category ID

PRODUCTS-FASTENERS-CLINCHFASTENER-STUDSANDPINS

Product Minor Category

Studs - Clinch & Pins

Sheet Min

1.6

Hole Diameter

6.0 +0.08

CL to Edge

7.9

Max Nut Tightening Torque

5.7

2200mm CRS Installation Force

44.5 kN

2200 CRS Push Out

2560 N

2200 CRS Torque Out

11.3 N-m

2400mm Aluminum Intallation Force

28.9 kN

2400mm Aluminum Push Out

1660 N

2400mm Aluminum Torque Out

7.3 N-m

Units and Tolerances

Specific units and tolerances are not displayed, but may be applicable for this product. For more information please call us or contact customer service.

CR Similar to Brand Pem

FH-M6-25ZI

Product Selector

Stud / Clinch

Product Guide

Self-Clinching Studs, Flush Head Guide

About OneMonroe

VMI - Custom Manufacturing, Technical Guides - Quality - Company Overview

Item Notes

Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.