Self-clinching studs, flush head are a type of stud that is designed to provide a flush finish when installed. The stud has a small, flat head that is crimped into a hole that is the same diameter as the head of the stud. This makes it possible to install the stud without creating a protrusion on the surface of the material. Self-clinching studs, flush head are typically made of steel or stainless steel and are available in a variety of sizes and finishes.
Unit of Measure

Item Description

Captive FHS-832-5 Stud, Flush Head, 300 Series Stainless Steel, Finish:Passivated, 8-32 X 0.3125 93580A661

Product Major Category

Fasteners (Self Clinching)

Measurement

Unified

Search Measurement

Unified

Thread Size

8-32

Material

Stainless

Search Material

Stainless

Search Material - Sub

Stainless Steel, 300 Series

Finish

Passivated

Length

5/16

Product Category ID

PRODUCTS-FASTENERS-CLINCHFASTENER-STUDSANDPINS

Product Minor Category

Studs - Clinch & Pins

Sheet Min

0.04

Hole Diameter

0.163 +0.003

CL to Edge

0.281

Max Nut Tightening Torque

15

060in CRS Installation Force

6800 lbs

060in CRS Push Out

370 lbs

060in CRS Torque Out

39 in-lbs

062in Aluminum Installation Force

4800 lbs

062in Aluminum Push Out

215 lbs

062in Aluminum Torque Out

29 in-lbs

Units and Tolerances

Specific units and tolerances are not displayed, but may be applicable for this product. For more information please call us or contact customer service.

CR Similar to Brand Pem

FHS-832-5

Product Selector

Stud / Clinch

Product Guide

Self-Clinching Studs, Flush Head Guide

About OneMonroe

VMI - Custom Manufacturing, Technical Guides - Quality - Company Overview

Item Notes

Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.