Self-clinching studs, flush head are a type of stud that is designed to provide a flush finish when installed. The stud has a small, flat head that is crimped into a hole that is the same diameter as the head of the stud. This makes it possible to install the stud without creating a protrusion on the surface of the material. Self-clinching studs, flush head are typically made of steel or stainless steel and are available in a variety of sizes and finishes.
Unit of Measure

Item Description

Captive FHS-M4-8 Stud, Flush Head, 300 Series Stainless Steel, Finish:Passivated, M4x0.7 X 8 93580A704

Product Major Category

Fasteners (Self Clinching)

Measurement

Metric

Search Measurement

Metric

Thread Size

M 4 x 0.70

Material

Stainless

Search Material

Stainless

Search Material - Sub

Stainless Steel, 300 Series

Finish

Passivated

Length

8

Product Category ID

PRODUCTS-FASTENERS-CLINCHFASTENER-STUDSANDPINS

Product Minor Category

Studs - Clinch & Pins

Sheet Min

1

Hole Diameter

4.0 +0.08

CL to Edge

7.2

Max Nut Tightening Torque

1.6

1500mm CRS Installation Force

28.9 kN

1500mm CRS Push Out

1780 N

1500mm CRS Torque Out

4.1 N-m

1600mm Aluminum Intallation Force

20.0 kN

1600 Aluminum Push Out

975 N

1600 Aluminum Torque Out

2.8 N-m

Units and Tolerances

Specific units and tolerances are not displayed, but may be applicable for this product. For more information please call us or contact customer service.

CR Similar to Brand Pem

FHS-M4-8

Product Selector

Stud / Clinch

CR 125

HA30L-0001-0021#06

CR 300

FHS-M4-8

Product Guide

Self-Clinching Studs, Flush Head Guide

About OneMonroe

VMI - Custom Manufacturing, Technical Guides - Quality - Company Overview

Item Notes

Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.