HOIST RING MATERIAL: Alloy steel (Certified heat treatment). Black Oxide . SAFETY FACTOR: 5:1
RANGE OF MOVEMENT: 360° Swivel, 180° Pivot
INSTALLATION: Tap work piece for hoist ring screw with axis vertical to mounting surface. Work surface should be flat and smooth to provide full 360° flush seating for the bushing flange. (SAFETY NOTE: Some loosening may develop after prolonged service in a permanent installation. It is advisable to periodically re-tighten the mounting screw to maintain the specified torque value.) The use of free fit spacers between the bushing flange and mounting surface is not recommended as this will reduce the safe load rating on angularly applied loads. Hoist Ring must be free to swivel 360° and pivot 180° at all times.
Material |
N/A Alloy Steel |
Finish |
N/A Black Oxide |
Country of Origin |
N/A US |
Rated Load |
N/A 1000 |
Type |
N/A Inch |
| Warning1 | N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Safety Factor (Min.) |
N/A 5:01 |
Pivot |
N/A 180 |
Swivel |
N/A 360 |
Torque |
N/A 12 |
ABD CR |
N/A 23053 |
MSC Conversion |
N/A 6921183 |
REID TOOL CR |
N/A SHR-23053 |
Load Rated |
N/A 1000 Pounds (454 kg) |
D - Diameter |
N/A 0.38 |
A - Radius |
N/A 0.43 |
B - Base Height |
N/A 0.71 |
C - Ring Width |
N/A 1.61 |
E - Thread Length |
N/A 0.54 |
Thread Length Tolerance |
N/A ± 0.060 |
F - Height |
N/A 2.67 |
Height Tolerance |
N/A ± 0.060 |
H - Inside Clearance |
N/A 1.21 |
I - Overall Width |
N/A 1.84 |
Overall Width Tolerance |
N/A ± 0.060 |
J - Base Width |
N/A 0.75 |
Item Notes |
N/A Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
877-916-1944
sales@askmonroe.com