Self-clinching studs, thin sheet are a type of stud that is designed to be installed in thin sheet metal. The stud has a small, tapered head that allows it to be crimped into a hole that is smaller than the diameter of the stud. This makes it possible to install the stud without distorting or damaging the sheet metal. Self-clinching studs, thin sheet are typically made of steel or stainless steel and are available in a variety of sizes and finishes.
Unit of Measure
Items
captive-tch

Self-Clinching Studs, Thin Sheet

captive-tch

Self-Clinching Studs, Thin Sheet

captive-tch

Self-Clinching Studs, Thin Sheet

captive-tch

Self-Clinching Studs, Thin Sheet

captive-tch

Self-Clinching Studs, Thin Sheet
Brand N/A Captive
Item Description N/A Captive TFH-440-4ZI Stud, Non-Flush Head, Steel, Finish: Zinc, 4-40 x 0.25 N/A Captive TFH-440-5ZI Stud, Non-Flush Head, Steel, Finish: Zinc, 4-40 x 0.3125 N/A Captive TFH-440-6ZI Stud, Non-Flush Head, Steel, Finish: Zinc, 4-40 x 0.375 N/A Captive TFH-440-8ZI Stud, Non-Flush Head, Steel, Finish: Zinc, 4-40 x 0.5 N/A Captive TFH-440-10ZI Stud, Non-Flush Head, Steel, Finish: Zinc, 4-40 x 0.625
Product Major Category N/A Fasteners (Self Clinching)
Measurement N/A Unified
Search Measurement N/A Unified
Thread Size
N/A 4-40
B N/A 0.176 ±0.015
Material
N/A Steel
Search Material
N/A Steel
Search Material - Sub
N/A Steel, Heat Treated
Finish N/A Zinc
Length N/A 1/4 N/A 5/16 N/A 3/8 N/A 1/2 N/A 5/8
Product Category ID N/A PRODUCTS-FASTENERS-CLINCHFASTENER-STUDSANDPINS
A N/A 0.025 -0.005
Product Minor Category N/A Studs - Clinch & Pins
Sheet Min N/A 0.02
Hole Diameter
N/A 0.111 +0.003
CL to Edge N/A 0.219
Max Nut Tightening Torque N/A 5in-lbs
025in Steel Sheet Hardness N/A 52
025in Steel Installation Force N/A 2800 tons
025in Steel Push Out N/A 95 lbs
025in Steel Torque Out N/A 7.8 in-lbs
020in Aluminum Sheet Hardness N/A 28 HRB
020in Aluminum Installation Force N/A 1300 tons
020in Aluminum Push Out N/A 40 lbs
020in Aluminum Torque Out N/A 6.9 in-lbs
600mm CRS Sheet Hardness N/A
600mm CRS Installation Force
N/A
600mm CRS Push Out
N/A
600mm CRS Torque Out N/A
500mm Aluminum Sheet Hardness N/A
500mm Aluminum Installation Force N/A
500mm Aluminum Push Out N/A
500mm Aluminum Torque Out N/A
Units and Tolerances N/A Specific units and tolerances are not displayed, but may be applicable for this product. For more information please call us or contact customer service.
CR Similar to Brand Pem N/A TFH-440-4ZI N/A TFH-440-5ZI N/A TFH-440-6ZI N/A TFH-440-8ZI N/A TFH-440-10ZI
Product Selector N/A Stud / Heat Treated Steel , Thin Metal
Product Additional Information N/A
About OneMonroe N/A VMI - Custom Manufacturing, Technical Guides - Quality - Company Overview
Item Notes N/A Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.