Self-clinching studs, flush head are a type of stud that is designed to provide a flush finish when installed. The stud has a small, flat head that is crimped into a hole that is the same diameter as the head of the stud. This makes it possible to install the stud without creating a protrusion on the surface of the material. Self-clinching studs, flush head are typically made of steel or stainless steel and are available in a variety of sizes and finishes.
Request Information Search by Specification
Unit of Measure
Items
Captive-CH

Self-Clinching Studs, Flush Head
Captive-CH

Self-Clinching Studs, Flush Head
Captive-CH

Self-Clinching Studs, Flush Head
Captive-CH

Self-Clinching Studs, Flush Head
Captive-CH

Self-Clinching Studs, Flush Head
Brand N/A Captive
Item Description N/A Captive FH-256-4ZI Stud, Flush Head, Steel, Finish:Zinc, 2-56 X 0.25 93580A541 N/A Captive FH-256-5ZI Stud, Flush Head, Steel, Finish:Zinc, 2-56 X 0.3125 93580A542 N/A Captive FH-256-6ZI Stud, Flush Head, Steel, Finish:Zinc, 2-56 X 0.375 93580A543 N/A Captive FH-256-8ZI Stud, Flush Head, Steel, Finish:Zinc, 2-56 X 0.5 93580A544 N/A Captive FH-256-10ZI Stud, Flush Head, Steel, Finish:Zinc, 2-56 X 0.625 93580A545
Product Major Category N/A Fasteners (Self Clinching)
Measurement N/A Unified
Search Measurement N/A Unified
Thread Size
N/A 2-56
Material
N/A Steel
Search Material
N/A Steel
Search Material - Sub
N/A Steel, Heat Treated
Finish N/A Zinc
Length N/A 1/4 N/A 5/16 N/A 3/8 N/A 1/2 N/A 5/8
Product Category ID N/A PRODUCTS-FASTENERS-CLINCHFASTENER-STUDSANDPINS
D N/A
Product Minor Category N/A Studs - Clinch & Pins
CR Reference Military Reference N/A M63540/1-1 N/A M63540/1-2 N/A M63540/1-3 N/A M63540/1-4 N/A M63540/1-5
Sheet Min N/A 0.04
Hole Diameter
N/A 0.085 +0.003
CL to Edge N/A 0.187
Max Nut Tightening Torque N/A 2.5
060in CRS Installation Force
N/A 2500 lbs
060in CRS Push Out
N/A 175 lbs
060in CRS Torque Out N/A 5 in-lbs
088in CRS Installation Force
N/A
088in CRS Push Out
N/A
088in CRS Torque Out N/A
093in CRS Installation Force
N/A
093in CRS Push Out
N/A
093in CRS Torque Out N/A
062in Aluminum Installation Force N/A 2000 lbs
062in Aluminum Push Out N/A 100 lbs
062in Aluminum Torque Out N/A 5 in-lbs
064in Aluminum Installation Force N/A
064in Aluminum Push Out N/A
064in Aluminum Torque Out N/A
093in Aluminum Installation Force N/A
093in Aluminum Push Out N/A
093in Aluminum Torque Out N/A
1500mm CRS Installation Force
N/A
1500mm CRS Push Out
N/A
1500mm CRS Torque Out N/A
2200mm CRS Installation Force
N/A
2200 CRS Push Out
N/A
2200 CRS Torque Out N/A
2400mm CRS Installation Force
N/A
2400mm CRS Push Out
N/A
2400mm CRS Torque Out N/A
1600mm Aluminum Intallation Force N/A
1600 Aluminum Push Out N/A
1600 Aluminum Torque Out N/A
2400mm Aluminum Intallation Force N/A
2400mm Aluminum Push Out N/A
2400mm Aluminum Torque Out N/A
Units and Tolerances N/A Specific units and tolerances are not displayed, but may be applicable for this product. For more information please call us or contact customer service.
CR Similar to Brand Pem N/A FH-256-4ZI N/A FH-256-5ZI N/A FH-256-6ZI N/A FH-256-8ZI N/A FH-256-10ZI
Product Selector N/A Stud / Clinch Pin & Tapered
CR 125 N/A HA30L-0001-0061#01 N/A N/A N/A N/A
CR 275 N/A
CR 300 N/A N/A N/A FH-256-6 N/A FH-256-8 N/A FH-256-10
Product Additional Information N/A
About OneMonroe N/A VMI - Custom Manufacturing, Technical Guides - Quality - Company Overview
Item Notes N/A Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.