HOIST RING MATERIAL: Alloy steel (Certified heat treatment). Black Oxide . SAFETY FACTOR: 5:1

RANGE OF MOVEMENT: 360° Swivel, 180° Pivot

INSTALLATION: Tap work piece for hoist ring screw with axis vertical to mounting surface. Work surface should be flat and smooth to provide full 360° flush seating for the bushing flange. (SAFETY NOTE: Some loosening may develop after prolonged service in a perma­nent installation. It is advisable to periodically re-tighten the mounting screw to maintain the specified torque value.) The use of free fit spacers between the bushing flange and mount­ing surface is not recommended as this will reduce the safe load rating on angularly applied loads. Hoist Ring must be free to swivel 360° and pivot 180° at all times.

Unit of Measure

Material

N/A Alloy Steel

Finish

N/A Black Oxide

Country of Origin

N/A US

Rated Load

N/A 10000

Type

N/A Inch
Warning1 N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.

Safety Factor (Min.)

N/A 5:01

Pivot

N/A 180

Swivel

N/A 360

Torque

N/A 230

ABD CR

N/A 23332

MSC Conversion

N/A 545970

REID TOOL CR

N/A SHR-23332

Load Rated

N/A 10000 Pounds (4536 kg)

D - Diameter

N/A 1

A - Radius

N/A 1.4

B - Base Height

N/A 1.71

C - Ring Width

N/A 4.8

E - Thread Length

N/A 1.54

Thread Length Tolerance

N/A ± 0.060

F - Height

N/A 8.11

Height Tolerance

N/A ± 0.060

H - Inside Clearance

N/A 4.4

I - Overall Width

N/A 5.14

Overall Width Tolerance

N/A ± 0.060

J - Base Width

N/A 2.37

Item Notes

N/A Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
  • 1 Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.