877-916-1944 sales@askmonroe.com
Self-clinching studs, flush head are a type of stud that is designed to provide a flush finish when installed. The stud has a small, flat head that is crimped into a hole that is the same diameter as the head of the stud. This makes it possible to install the stud without creating a protrusion on the surface of the material. Self-clinching studs, flush head are typically made of steel or stainless steel and are available in a variety of sizes and finishes.
Unit of Measure

Technical Specs

Item Description

N/A Captive FH-M5-15ZI Stud, Flush Head, Steel, Finish:Zinc, M5x0.8 X 15 93580A604

Product Major Category

N/A Fasteners (Self Clinching)

Measurement

N/A Metric

Search Measurement

N/A Metric

Thread Size

N/A M 5 x 0.80

Material

N/A Steel

Search Material

N/A Steel

Search Material - Sub

N/A Steel, Heat Treated

Finish

N/A Zinc

Length

N/A 15 mm

Product Category ID

N/A PRODUCTS-FASTENERS-CLINCHFASTENER-STUDSANDPINS

Product Minor Category

N/A Studs - Clinch & Pins

Sheet Min

N/A 1

Hole Diameter

N/A 5.0 +0.08

CL to Edge

N/A 7.2

Max Nut Tightening Torque

N/A 3.4

1500mm CRS Installation Force

N/A 33.4 kN

1500mm CRS Push Out

N/A 2000 N

1500mm CRS Torque Out

N/A 6.5 N-m

1600mm Aluminum Intallation Force

N/A 24.5 kN

1600 Aluminum Push Out

N/A 1070 N

1600 Aluminum Torque Out

N/A 3.5 N-m

Units and Tolerances

N/A Specific units and tolerances are not displayed, but may be applicable for this product. For more information please call us or contact customer service.

CR Similar to Brand Pem

N/A FH-M5-15ZI

Product Selector

N/A Stud / Clinch

CR 300

N/A FH-M5-15

Product Guide

N/A Self-Clinching Studs, Flush Head Guide

About OneMonroe

N/A VMI - Custom Manufacturing, Technical Guides - Quality - Company Overview

Item Notes

N/A Product image(s) are representational. Please see manufacturer specification or contact a Sales Engineer for more information. Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.

Thank you for expressing your interest. Should you have any inquiries or require further information, please do not hesitate to contact us at (877) 916-1944 or via email at sales@askmonroe.com.

© 2023 OneMonroe. All Rights Reserved.